manualshive.com logo in svg

Toyota Prius 2018, Owner'S Manual, Page: 147 / 820

Share
Download
Toyota Prius 2018 Owner'S Manual Download Page 147

PRIUS_OM_OM47B89U_(U)

147

2. Instrument cluster

2

Instrum

e

nt clus

ter

Insert display

 (

→

P. 149

)

This display inserts information from each driving support system accord-
ing to driving conditions.

Route guidance display (vehicles with navigation system) 
(

→

P. 150)

This display is automatically shown when the navigation system is per-
forming route guidance.

The “HUD” switch can be used to turn the head-up display on and off,
or switch the display contents.

■

When the head-up display is off

Pressing the “HUD” switch
turns the head-up display on
and starts the display.

The indicator light on the “HUD”
switch comes on.

The display position and bright-
ness adjustment screen is auto-
matically displayed on the multi-
information display. (

→

P. 148)

■

When the head-up display is on

Display items can be switched by pressing the “HUD” switch.

Vehicle speed display and
cruise control display

*

Vehicle speed display and
Hybrid System Indicator

*

Refer to P. 119 for details of the
Hybrid System Indicator.

No display (head-up display
is off)

The indicator light on the “HUD”
switch turns off.

*

: When the insert display of each

driving support system is dis-
played, the display is temporar-
ily turned off.

“HUD” (Head-up display) switch

6

7

1

2

3

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments