manualshive.com logo in svg

Toyota Prius 2018, Owner'S Manual, Page: 138 / 820

Share
Download
Toyota Prius 2018 Owner'S Manual Download Page 138

138

PRIUS_OM_OM47B89U_(U)

2. Instrument cluster

The operation status of driving
support system such as the LDA
(Lane Departure Alert with steer-
ing control) (if equipped) and
dynamic radar cruise control with
full-speed range (if equipped) and
warning information are dis-
played.

For details regarding the driving
support functions, refer to the page
for the corresponding function.

The warning messages that have
been displayed since the power
switch was turned to ON mode
can be checked.

When multiple warning messages
have been displayed, the display

can be switched by pressing 

 or

 of the meter control switches.

Warning messages that have been currently cleared and some warning
messages are not displayed. Also, when there are no warning messages
that can be checked, the display indicates that there are no messages.

 Driving assist system information

 Warning message display

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments