Toyota Prius 2018 Page 119 Owner'S Manual Download

Page: 119 / 820

PRIUS_OM_OM47B89U_(U)

119

2. Instrument cluster

Instrum

nt clus

ter

◆

Hybrid System Indicator

The display changes according to accelerator pedal operation and
displays the current driving status and energy regeneration status.

The Hybrid System Indicator can be displayed on the sub-screen of the
main display (

→

P. 112) and the head-up display (if equipped)

(

→

P. 146).

■

How to read the display

Charge area

Shows that energy is being recovered via the regenerative charging.

Eco area

Shows that the vehicle is being driven in an Eco-friendly manner.

Power area

Shows that an Eco-friendly driving range is being exceeded (during full
power driving etc.)

Hybrid Eco area

Shows that gasoline engine power is not being used very often.

The gasoline engine will automatically stop and restart under various
conditions.

Head-up display

(if equipped)

Sub-screen

Multi-information

display

Summary of Contents for Prius 2018





















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius 2018

Reviews:

Related manuals for Prius 2018

Brands by name

Popular brands

Toyota Prius 2018, Owner'S Manual

Search results

Summary of Contents for Prius 2018

Reviews:

Related manuals for Prius 2018

Brands by name

Popular brands