Toyota OM30875U Manual Download

Page: 34 / 144

DESTINATION SEARCH

SELECTING THE REGION TO SEARCH
ON THE DESTINATION SCREEN

1. Push the “DEST” button.

2. Touch “Change” on the “Destina-
tion” screen to display a map of the
United States and Canada divided into
12 regions.

(For map database informa-

tion and updates, see “Map database in-

formation and updates” on page 140.)

3. Touch one of “US1” through “CAN”
to select a region to search.

4. Touch “OK” and the “Destination”
screen returns.

SELECTING THE REGION TO SEARCH
ON THE INPUT SCREEN

Change the selected region in order to set

a destination from a different region by us-

ing “Address”, “POI”, “Freeway Ent./Exit”

or “Intersection”.

1. Touch the region to search button
like “US8” on the input screen to dis-
play a map of the United States and
Canada divided into 12 regions.

(For

map database information and updates,

see “Map database information and up-

dates” on page 140.)

2. Touch one of “US1” through “CAN”
to select a region to search.

3. Touch “OK” and the previous
screen returns.

— Selecting the region to
search

Summary of Contents for OM30875U

















































































































































Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands

Toyota OM30875U, Manual

Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands