Toyota OM30875U Manual Download

Page: 120 / 144

OTHER FUNCTIONS

126

Microphone

It is unnecessary to speak directly into
the microphone when giving a com-
mand.

Speech command example: Searching
for a route to your home.

1. Push the talk switch.

2. Say “Home”.

You can also say the street name or ad-

dress.* (ex. say

“Woodridge Avenue”

*: “Hawaii” or Hawaii area is not covered by

the voice recognition.
If your home is not registered, you will hear

“Home is not registered”.

3. If the system recognized the com-
mand, the recognition result “Home” is
displayed on the top of the screen with
the screen message. (Displayed mes-
sage and the touch−screen buttons on
the screen depend on the situation.)

Touch or say

“Cancel”

, and the system will

be canceled. Touch or say

“Help”

, and dis-

plays the “Help” screen.

Summary of Contents for OM30875U

















































































































































Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands

Toyota OM30875U, Manual

Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands