Toyota OM30875U Manual Download

Page: 110 / 144

OTHER FUNCTIONS

116

When the navigation System is turned on,

the “Information” screen displays when it is

time to replace a part or certain compo-

nents. (See page 21.)

1. Push the “INFO” button.

5U5611L

2. Touch “Maintenance”.

3. Touch the desired button.

For details of each touch

−

screen button,

see “INFORMATION ITEMS” on page 117.

“Delete All”:

To cancel all conditions

which have been inputted.

“Reset All”:

To reset the item which has

satisfied a condition.

“Set Dealer”:

To register or edit dealer in-

formation. (See “ — Dealer setting” on

page 118.)
If

“ON”

is selected, the system gives main-

tenance information with the “Information”

screen when the system is turned on. (See

page 21.)
If

“OFF”

is selected, the “Information”

screen is disabled.
When the vehicle needs to be serviced, the

touch

−

screen button color will change to

orange.

Maintenance information —
— Maintenance information
setting

Summary of Contents for OM30875U

















































































































































Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands

Toyota OM30875U, Manual

Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands