Toyota OM30875U Manual Download

Page: 103 / 144

ADVANCED FUNCTIONS

109

Notifying traffic restriction

When the “Traffic Restrict. Notification”

feature is turned on, the system notifies

you of traffic or seasonal restrictions.
To turn the “Traffic Restrict. Notification”

on:

1. Push the “MENU” button.

2. Touch “Setup” on the “Menu”
screen.

Then touch

to display page 2 of the

“Setup” screen.

3. Touch “ON” of “Traffic Restrict. No-
tification”.

The selected button is highlighted.

4. Touch “OK”.

Voice recognition guidance

When the “Voice Recognition Guidance”

feature is turned on, the voice recognition

guidance can be heard automatically.
To turn the “Voice Recognition Guidance”

on:

1. Push the “MENU” button.

2. Touch “Setup” on the “Menu”
screen.

Then touch

to display page 2 of the

“Setup” screen.

3. Touch “ON” of “Voice Recognition
Guidance”.

The selected button is highlighted.

4. Touch “OK”.

Summary of Contents for OM30875U

















































































































































Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands

Toyota OM30875U, Manual

Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands