Toyota NLP121L, Installation Manual

Page: 95 / 151

- 91 -
00504451E
(g) Remove an hexagonal wrench (5 mm) from the
anchoring hole.
4: DRIVE SHAFT
2: HEXAGONAL
WRENCH (5 mm)
3: BOX-END
COMBINATION
WRENCH (14 mm)
5: FRONT
1: SEE UP THE UNDER
A029628
(h) Connect the vehicle harness to the compressor.
2: COMPRESSOR
2: COMPRESSOR
A029636
1: SEE UP THE UNDER
4: FRONT
3: VEHICLE
CONNECTOR
(2-P)
(4) CONDENSER
(a) Install the condenser to the radiator.
NOTE
1. Insert the resin bracket at the lower side of
condenser into the lower side of the radiator,
and then insert the resin bracket at the upper
side of condenser into the upper side of
radiator.
2. Lift the radiator upper support and install the
condenser.
A029637
2:CONDENSER
2:CONDENSER
3: RADIATOR
UPPER
SUPPORT
1: RADIATOR
4: FRONT
1: RADIATOR