Toyota NLP121L, Installation Manual

Page: 113 / 151

- 109 -
00504451E
(b) Fully tighten the bolt.
(c) Fully tighten the nut.
Tightening Torque
5.4 N•m (55 kgf•cm, 4.0 lbf•ft)
A043968
1: LIQUID TUBE No.1
2: LIQUID TUBE No.2
3: NUT (M6)
FULLY TIGHTEN 4:
5: BOLT (M6 16)
FULLY TIGHTEN 4:
6: FRONT
CAUTION
If the clearance between liquid tube No.1 and the
vehicle clamp is less than 15mm, turn the clip and
create clearance between liquid tube No.1 and the
clip.
6: FRONT
5: DRIVE SHAFT
A043969
2: LIQUID
TUBE No.3
3: VEHICLE
CLAMP
15 mm
OR LESS 4:
3: VEHICLE CLAMP
1: SEE UP THE UNDER
2: LIQUID
TUBE No.3
(d) Pull the vehicle harness.
1: VEHICLE CONNECTOR (3-P)
A043970
3: ALTERNATOR
2: TAPING (CUT OUT)
4: FRONT
(e) Connect the vehicle harness to the pressure
sensor.
A043971
3: FRONT
1: VEHICLE CONNECTOR (3-P)
2: PRESSURE SENSOR