manualshive.com logo in svg

Toyota Lexusc, Owner'S Handbook Manual

Share
Download
Toyota Lexusc Owner'S Handbook Manual Download Page 328

AUDIO

309

If a cassette is already in the slot, push the “TAPE” button.

Dolby

 

Noise Reduction* feature:

 

If you are listening to a

tape that was recorded with Dolby

  Noise Reduction*, push

the “

” button.  The display will indicate that the Dolby noise

reduction system is on.

The Dolby NR mode reduces tape noise by about 10 dB.  For
best sound reproduction, play your tapes with the Dolby NR on
or off according to the mode used for recording the tape.

To play a tape recorded without Dolby NR, push the button
again to turn off the Dolby NR.

* Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.  “DOLBY” and the double-D
symbol 

 are trademarks of Dolby Laboratories Licensing

Corporation.

(b) Manual program selection

“Program” button: Push the “

 

” button to select the

other side of a cassette tape.  The display indicates which side
is currently selected (“

” indicates top side, “

” indicates

bottom side).

“Rewind” button: Push the “

” button to rewind a tape.

“REW” appears on the display.

To stop rewinding, push the same button or “TAPE” button.

“Fast forward” button: Push the “

” button to fast forward

a cassette tape.  “FF” appears on the display.

To stop fast forwarding, push the same button or “TAPE”
button.

Summary of Contents for Lexusc














































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands