manualshive.com logo in svg

Toyota Lexus IS300, Manual

Share
Download
Toyota Lexus IS300 Manual Download Page 48

SWITCHES

35

The system will automatically shut off when the defogger has
operated about 15 minutes.

CAUTION

Since the mirror surfaces can get hot, do not touch them
when the switch is on or operate the wipers.

If further defrosting or defogging is desired, simply actuate the
switch again.  When the surface has cleared, push the switch
once again to turn the defogger off.  Continuous use may cause
the battery to discharge, especially during stop–and–go
driving.  The defogger is not designed to dry rain water or to
melt snow.

NOTICE

When cleaning the inside of the rear window, be
careful not to scratch or damage the heater wires or
connectors.

To prevent the battery from being discharged, do not
operate the defogger continuously longer than
necessary.

POWER WINDOW SWITCHES

SV12019a

 1

For driver’s window

 2

For front passenger’s window

 3

For left rear window

 4

For right rear window

To raise or lower the windows, use the switch on each
door.  The passengers’ windows can also be controlled by
the switches on the driver’s door.

The power windows work when the ignition key is in the ”ON”
position.

2003 IS300 from Aug. ’02 Prod. (OM53439U)

Summary of Contents for Lexus IS300






































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands