Toyota Lexus IS300 Manual Download Page 226

Page: 226 / 389

AUDIO

213

Type B

SV22046

When you insert a compact disc, lightly push it in with the
label side up.

The disc player will grab the disc and slide it into place to play
it from the track 1 program.

As this is done, ”CD” appears on the display. Also, the track
number and elapsed playback time will appear on the display.

SV22047

To eject the compact disc, push the ”EJECT” button.

2003 IS300 from Aug. ’02 Prod. (OM53439U)

Summary of Contents for Lexus IS300






































































































































































































































































































































































































Search results

Summary of Contents for Lexus IS300

Reviews:

Related manuals for Lexus IS300

Brands by name

Popular brands

Toyota Lexus IS300, Manual

Search results

Summary of Contents for Lexus IS300

Reviews:

Related manuals for Lexus IS300

Brands by name

Popular brands