Toyota Land Cruiser 2007 Manual Download Page 95

Page: 95 / 308

Condition and operation in the front passenger occupant classification system

Indicator/ warning light

Devices

Condition detected by
the front passenger
occupant classification
system

Front passenger

occupant

classification

indicator light

SRS warning

light

Front

passenger’s

seat belt

reminder light

Front

passenger

airbag

Side airbag on

the front

passenger

seat

Curtain shield

airbag in the

front

passenger

side

Front

passenger’s

seat belt

pretensioner

1. Adult

“ON”

Off

Flashing

Activated

2. Child

or child

restraint system

“OFF”

Off

Flashing

Deactivated

Activated

3. Unoccupied

Not illuminated

Off

Deactivated

Activated

Deactivated

4. There is a malfunction

in the system

“OFF”

Off

Deactivated

Activated

: The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may

recognize him/her as a child depending on his/her physique and posture.

: When a larger child who has outgrown a child restraint system sits in the front passenger seat, the system may recognize him/her

as an adult depending on his/her physique or posture.

: Never install a rear−facing child restraint system on the front passenger seat. A forward−facing child restraint system should only

be installed on the front passenger seat when it is unavoidable. (See “Child restraint” on page 83 as for installing the child restraint
system.)

: In case indicator is not illuminated, see “Child restraint” on page 83 as for the child restraint system properly.

: When the front passenger does not wear a seat belt.

Summary of Contents for Land Cruiser 2007





















































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2007

Reviews:

Related manuals for Land Cruiser 2007

Brands by name

Popular brands

Toyota Land Cruiser 2007, Manual

Search results

Summary of Contents for Land Cruiser 2007

Reviews:

Related manuals for Land Cruiser 2007

Brands by name

Popular brands