Toyota IQ 2012 Owner'S Manual Download Page 452

Page: 452 / 476

452

6-1. Specifications

iQ_WE_74014E

Cooling system

Ignition system

Capacity
(Reference)

1KR-FE
engine

Vehicles with a manual transmission

4.3 L (4.5 qt., 3.8 Imp.qt.)
Vehicles with a Multidrive
4.5 L (4.8 qt., 4.0 Imp.qt.)

1NR-FE
engine

Vehicles with a manual transmission
4.7 L (5.0 qt., 4.1 Imp.qt.)

Vehicles with a Multidrive

4.9 L (5.2 qt., 4.3 Imp.qt.)

Coolant type

Use either of the following.

• “Toyota Super Long Life Coolant”
• Similar high-quality ethylene glycol-based non-

silicate, non-amine, non-nitrite, and non-borate
coolant with long-life hybrid organic acid tech-
nology

Do not use plain water alone.

Spark plug
Make

1KR-FE engine
DENSO SK16HR11
1NR-FE engine
DENSO SC20HR11

Gap

1.1 mm (0.043 in.)

NOTICE



Iridium-tipped spark plugs

Use only iridium-tipped spark plugs. Do not adjust gap when tuning engine.

Summary of Contents for IQ 2012





























































































































































































































































































































































































































































































Search results

Summary of Contents for IQ 2012

Reviews:

Related manuals for IQ 2012

Brands by name

Popular brands

Toyota IQ 2012, Owner'S Manual

Search results

Summary of Contents for IQ 2012

Reviews:

Related manuals for IQ 2012

Brands by name

Popular brands