manualshive.com logo in svg

Toyota IQ 2012, Owner'S Manual, Page: 435 / 476

Share
Download
Toyota IQ 2012 Owner'S Manual Download Page 435

5

435

5-2. Steps to take in an emergency

Wh
en tro

uble

 a

rises

iQ_WE_74014E

If your vehicle overheats

Correction procedures

Stop the vehicle in a safe place and turn off the air condition-
ing system, and then stop the engine.
If you see steam: 

Carefully lift the hood after the steam subsides.

If you do not see steam: 

Carefully lift the hood.

After the engine has cooled
down sufficiently, inspect the
hoses and radiator core (radia-
tor) for any leaks.

Radiator
Cooling fan

If a large amount of coolant leaks,
immediately contact any autho-
rized Toyota dealer or repairer, or
another duly qualified and
equipped professional.

The following may indicate that your vehicle is overheating.

The high engine coolant temperature warning light (

P. 398)

comes on or flashes, or a loss of engine power is experienced.
(For example, the vehicle speed does not increase.)

Steam comes out from under the hood.

Summary of Contents for IQ 2012





























































































































































































































































































































































































































































































Reviews:

No comments