manualshive.com logo in svg

Toyota IQ 2012, Owner'S Manual, Page: 350 / 476

Share
Download
Toyota IQ 2012 Owner'S Manual Download Page 350

350

4-3. Do-it-yourself maintenance

iQ_WE_74014E

Tire inflation pressure

Effects of incorrect tire inflation pressure

Driving with incorrect tire inflation pressure may result in the following:

Reduced fuel efficiency

Reduced driving comfort and tire life

Reduced safety

Damage to the drive train

If a tire needs frequent refilling, have it checked by any authorized Toyota
dealer or repairer, or another duly qualified and equipped professional.

Instructions for checking tire inflation pressure

When checking tire inflation pressure, observe the following:

Check only when the tires are cold.
If your vehicle has been parked for at least 3 hours and has not been
driven for more than 1.5 km or 1 mile, you will get an accurate cold tire
inflation pressure reading.

Always use a tire pressure gauge.
The appearance of the tire can be misleading. In addition, tire inflation
pressures that are even just a few pounds off can degrade ride and han-
dling.

Do not bleed or reduce tire inflation pressure after driving. It is normal for
the tire inflation pressure to be higher after driving.

Never exceed the vehicle capacity weight.
Passengers and luggage weight should be placed so that the vehicle is
balanced.

Make sure to maintain the proper tire inflation pressure. Tire inflation
pressure should be checked at least once per month. However,
Toyota recommends that tire inflation pressure be checked once
every two weeks. (

P. 455)

Summary of Contents for IQ 2012





























































































































































































































































































































































































































































































Reviews:

No comments