Toyota Highlander Hybrid 2020, Owner'S Manual, Page: 508 / 572

508
8-1. Specifications
HIGHLANDER HV_U

Rear
■
Oil capacity (Drain and
refill

reference
*
)
*
: The engine oil capacity is a refer-
ence quantity to be used when
changing the engine oil. Warm up
the engine and turn off the hybrid
system, wait more than 5 min-
utes, and check the oil level on
the dipstick.
■
Engine oil selection
“Toyota Genuine Motor Oil” is
used in your Toyota vehicle. Use
Toyota approved “Toyota Genu-
ine Motor Oil” or equivalent to
satisfy the following grade and
viscosity.
Oil grade: API SN/RC multi-
grade engine oil
Recommended viscosity: SAE
0W-16
Outside temperature
SAE 0W-16 is the best choice
for good fuel economy and good
starting in cold weather.
If SAE 0W-16 is not available,
SAE 0W-20 oil may be used.
However, it must be replaced
Type
Permanent magnet synchronous
motor
Maximum output 40 kW
Maximum torque 89 ft•lbf (121 N•m, 12.3 kgf•m)
Hybrid battery (traction battery)
Type Nickel-Metal hydride battery
Voltage 7.2 V/module
Capacity 6.5 Ah (3HR)
Quantity 40 modules
Nominal voltage 288 V
Lubrication system
With filter
4.8 qt. (4.5 L, 4.0 Imp.
qt.)
Without
filter 4.4 qt. (4.2 L, 3.7 Imp.
qt.)