Toyota Highlander Hybrid 2020 Page 360 Owner'S Manual Download

Page: 360 / 572

360

5-4. Using the storage features

HIGHLANDER HV_U

Unlock with the mechanical
key

Lock with the mechanical key

Open (pull lever)

■

Glove box light

The glove box light turns on when

the tail lights are on.

Push the tab and slide the
console box lid.

Vehicles with wireless
charge: Lift the wireless char-
ger.

■

Tray inside console box

The tray can be slid forward/back-

ward.

WARNING

■

When storage compartments

are not in use

When driving or when the storage

compartments are not in use,

keep the lids closed.
In the event of sudden braking or

sudden swerving, an accident

may occur due to an occupant

being struck by an open lid or the

items stored inside.

Glove box

Console box

Summary of Contents for Highlander Hybrid 2020





























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander Hybrid 2020

Reviews:

Related manuals for Highlander Hybrid 2020

Brands by name

Popular brands

Toyota Highlander Hybrid 2020, Owner'S Manual

Search results

Summary of Contents for Highlander Hybrid 2020

Reviews:

Related manuals for Highlander Hybrid 2020

Brands by name

Popular brands