manualshive.com logo in svg

Toyota Highlander Hybrid 2020, Owner'S Manual, Page: 306 / 572

Share
Download
Toyota Highlander Hybrid 2020 Owner'S Manual Download Page 306

306

4-5. Using the driving support systems

HIGHLANDER HV_U

*

: If equipped

This function will operate in situations such as the following if an 
object is detected in the traveling direction of the vehicle.

■

When traveling at a low speed and the brake pedal is not 
depressed, or is depressed late

Parking Support Brake function (static objects)

*

If the sensors detect a static object, such as a wall, in the trav-
elling direction of the vehicle and the system determines that 
a collision may occur due to the vehicle suddenly moving for-
ward due to an accidental accelerator pedal operation, the 
vehicle moving the unintended direction due to the wrong 
shift lever position, or while parking or traveling at low 
speeds, the system will operate to lessen the impact with the 
detected static object and reduce the resulting damage.

Examples of function operation

Summary of Contents for Highlander Hybrid 2020





























































































































































































































































































































































































































































































































































































Reviews:

No comments