manualshive.com logo in svg

Toyota Highlander Hybrid 2020, Owner'S Manual, Page: 10 / 572

Share
Download
Toyota Highlander Hybrid 2020 Owner'S Manual Download Page 10

10

HIGHLANDER HV_U

Reading this manual

Explains symbols used in 
this manual.

Symbols in this manual

Symbols

Meanings

WARNING:
Explains something 
that, if not obeyed, 
could cause death or 
serious injury to peo-
ple.

NOTICE:
Explains something 
that, if not obeyed, 
could cause dam-
age to or a malfunc-
tion in the vehicle or 
its equipment.

Indicates operating 
or working proce-
dures. Follow the 
steps in numerical 
order.

Symbols in illustrations

Symbols

Meanings

Indicates the action 
(pushing, turning, 
etc.) used to operate 
switches and other 
devices.

Indicates the out-
come of an operation 
(e.g. a lid opens).

Symbols

Meanings

Indicates the compo-
nent or position 
being explained.

Means 

Do not

, 

Do 

not do this

, or 

Do 

not let this happen

.

Summary of Contents for Highlander Hybrid 2020





























































































































































































































































































































































































































































































































































































Reviews:

No comments