Toyota Highlander Hybrid 2017 Owner'S Manual Download Page 126

Page: 126 / 716

126

3-2. Opening, closing and locking the doors

HIGHLANDER_HV_U (OM48F12U)

■

Alarm (if equipped)

Locking the doors will set the alarm system. (

→

P. 93)

■

If the smart key system or the wireless remote control does not operate
properly

Use the mechanical key to lock and unlock the doors. (

→

P. 623)

Replace the key battery with a new one if it is depleted. (

→

P. 539)

◆

Door lock switch

Locks all the doors
Unlocks all the doors

◆

Inside lock buttons

Locks the doors
Unlocks the doors

The front doors can be opened
by pulling the inside handle
even if the lock buttons are in
the lock position.

Move the inside lock button to the lock position.
Close the door.

The door cannot be locked if the power switch is in ACCESSORY or
ON mode, or the electronic key is left inside the vehicle.

The key may not be detected correctly and the door may be locked.

Unlocking and locking the doors from the inside

1
2

Locking the front doors from the outside without a key

1
2

Summary of Contents for Highlander Hybrid 2017













































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander Hybrid 2017

Reviews:

Related manuals for Highlander Hybrid 2017

Brands by name

Popular brands

Toyota Highlander Hybrid 2017, Owner'S Manual

Search results

Summary of Contents for Highlander Hybrid 2017

Reviews:

Related manuals for Highlander Hybrid 2017

Brands by name

Popular brands