manualshive.com logo in svg

Toyota Highlander guide, Service Manual

Share
Download
Toyota Highlander guide Service Manual Download Page 644

644

8-2. Steps to take in an emergency

HIGHLANDER_U (OM0E017U)

●

The needle of the engine coolant temperature gauge (

→

P. 92)

enters the red zone or a loss of engine power is experienced. (For
example, the vehicle speed does not increase.)

●

Steam comes out from under the hood.

Stop the vehicle in a safe place and turn off the air conditioning sys-
tem, and then stop the engine.
If you see steam: 
Carefully lift the hood after the steam subsides.
If you do not see steam:
Carefully lift the hood.
After the engine has cooled
down sufficiently, inspect the
hoses and radiator core (radia-
tor) for any leaks.

Radiator
Cooling fans

If a large amount of coolant
leaks, immediately contact your
Toyota dealer.

The coolant level is satisfactory
if it is between the “FULL” and
“LOW” lines on the reservoir.

Reservoir
“FULL”
“LOW”
Radiator cap

If your vehicle overheats

The following may indicate that your vehicle is overheating.

Correction procedures

1

2

3

1
2

4

1
2
3
4

Summary of Contents for Highlander guide





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands