Toyota Highlander guide Service Manual Download Page 222

Page: 222 / 732

222

4-2. Driving procedures

HIGHLANDER_U (OM0E017U)

Stop the vehicle.
Set the parking brake (

P. 234), and shift the shift lever to P.

Press the engine switch.
Release the brake pedal and check that “ACCESSORY” or “IGNI-
TION ON” on the multi-information display is off.

Modes can be changed by pressing the engine switch with brake
pedal released. (The mode changes each time the switch is pressed.)

Off

The emergency flashers can be
used.
The multi-information display will
not be displayed.

ACCESSORY mode

Some electrical components such
as the power outlet can be used.
“ACCESSORY” will be displayed
on the multi-information display.

IGNITION ON mode

All electrical components can be
used.
“IGNITION ON” will be displayed on the multi-information display.

: If the shift lever is in a position other than P when turning off the engine,

the engine switch will be turned to ACCESSORY mode, not to off.

Stopping the engine

Changing engine switch modes

1
2
3
4

Summary of Contents for Highlander guide





























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander guide

Reviews:

Brands by name

Popular brands

Toyota Highlander guide, Service Manual

Search results

Summary of Contents for Highlander guide

Reviews:

Brands by name

Popular brands