Toyota Highlander 2020 Owner'S Manual Download Page 328

Page: 328 / 560

328

5-2. Using the air conditioning system and defogger

HIGHLANDER_U

5-2.Using the air conditioning system and defogger

: If equipped

Fan speed control switch

On/off switch

Windshield defogger switch

“A/C” switch

Outside/recirculated air mode switch

Temperature control switch

“MAX A/C” switch

“REAR” switch

Press the switch to turn the rear air conditioning system on/off. (



P.346)

When the rear air conditioning system is on, the indicator illuminates on the
“REAR” switch.

Airflow mode control switch

Rear window defogger and outside rear view mirror defoggers
switch

Windshield wiper de-icer switch

■

Adjusting the temperature
setting

To adjust the temperature set-
ting, turn the temperature con-
trol switch clockwise (warm) or
counterclockwise (cool).

If “A/C” switch is not pressed, the

system will blow ambient tempera-
ture air or heated air.

■

Fan speed setting

To adjust the fan speed, turn the
fan speed control switch clock-
wise (increase) or counterclock-
wise (decrease).

Front manual air conditioning system

Air conditioning controls

Summary of Contents for Highlander 2020

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander 2020

Reviews:

Brands by name

Popular brands

Toyota Highlander 2020, Owner'S Manual

Search results

Summary of Contents for Highlander 2020

Reviews:

Brands by name

Popular brands