Toyota GR Supra, Owner'S Manual

Page: 122 / 356

122
4-1. CONTROLS
Supra Owner's Manual
Press the lever up until the
desired position is reached.
 Resting position of the wipers,
position
0
.
 Rain sensor, position
1
.
 Normal wiper speed, position
2
.
 Fast wiper speed, position
3
.
When travel is interrupted with
the wiper system switched on:
when travel continues, the wip-
ers resume at their previous
speed.
Press the lever down.
 Switching off: press the lever
down until it reaches its stan-
dard position.

Brief wipe: press the lever
down from the standard posi-
tion.
The lever automatically returns to
its initial position when released.
The rain sensor automatically
controls the time between wipes
depending on the intensity of the
rainfall.
The sensor is located on the
Safety information
WARNING
If the wipers start moving in the
folded away state, body parts can
be jammed or damage may occur
to parts of the vehicle. There is a
risk of injury or risk of damage to
property. Make sure that the vehi-
cle is switched off when the wip-
ers are in the folded away state
and the wipers are folded in when
switching on.
NOTICE
If the wipers are frozen to the
windshield, the wiper blades can
be torn off and the wiper motor
can overheat when switching on.
There is a risk of damage to prop-
erty. Defrost the windshield prior
to switching the wipers on.
Switching on
Switching off and brief
wipe
Rain sensor
Concept
General information