Toyota COROLLA iM 2017 Service Manual Download Page 141

Page: 141 / 384

141

Drivin

COROLLA iM_U (OM12K64U)

4-3. Operating the lights and wipers

Turning the end of the lever turns on the lights as follows:



Type A

The headlights and all
the lights listed below
turn on and off auto-
matically.
(When the engine
switch is in the “ON”
position)

The side marker, park-
ing, tail, license plate,
daytime running lights
(

→

P. 143) and instru-

ment panel lights turn
on.

The headlights and all
the lights listed above
(except daytime run-
ning lights) turn on.

The daytime running lights turn off.

Headlight switch

The headlights can be operated manually or automatically.

Operating instructions

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Search results

Summary of Contents for COROLLA iM 2017

Reviews:

Toyota COROLLA iM 2017, Service Manual, Page: 141 / 384

Search results

Summary of Contents for COROLLA iM 2017

Reviews: