Toyota Corolla Hybrid 2019 Owner'S Manual Download

Page: 62 / 491

COROLLA HV_ 国瑞 _GE

1-2. Child safety

attached to the child restraint

system.

Example of the displayed regulation

number

UN(ECE) R44 approval mark

The weight range of the child

who is applicable for an

UN(ECE) R44 approval mark is

indicated.
UN(ECE) R129 approval mark

The height range of the child

who is applicable as well as

available weights for an

UN(ECE) R129 approval mark

is indicated.

Checking the category of the

child restraint system.

Check the approval mark of the

child restraint system for which

of the following categories the

child restraint system is suitable.

Also, if there are any uncertain-

ties, check the user’s guide

included with the child restraint

system or contact the retailer of

the child restraint system.

• “universal”

• “semi-universal”

• “restricted”

• “vehicle specific”

: UN(ECE) R44 and UN(ECE) R129

are U.N. regulations for child

restraint systems.

: The child restraint systems men-

tioned in the table may not be availa-

ble outside of the EU area.

: The displayed mark may differ

depending on the product.

■

Compatibility of each seating
position with child restraint
systems

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands