Toyota Corolla Hybrid 2019 Owner'S Manual Download Page 412

Page: 412 / 491

410

COROLLA HV_ 国瑞 _GE

8-2. Steps to take in an emergency

■

ABS warning light

■

Brake Override System warning light/Drive-Start Control warning
light

(warning buzzer)

: This light illuminates on the multi-information display.

■

Electric power steering system warning light (warning buzzer)

Warning light

Details/Actions

Indicates a malfunction in:



The ABS; or



The brake assist system



Have the vehicle inspected by your Toyota dealer immedi-
ately.

Warning light

Details/Actions

When a buzzer sounds:
Indicates a malfunction in:



The Brake Override System; or



The Drive-Start Control



Have the vehicle inspected by your Toyota dealer immedi-
ately.

Indicates that the shift position was changed and Drive-Start Con-

trol was operated while depressing the accelerator pedal.



Momentarily release the accelerator pedal.

When a buzzer does not sound:
Indicates that the accelerator and brake pedals are being

depressed simultaneously, and the Brake Override System is

operating.



Release the accelerator pedal and depress the brake pedal.

Warning light

Details/Actions

(Red)

(Yellow)

Indicates a malfunction in the EPS (Electric Power Steering) sys-

tem



Have the vehicle inspected by your Toyota dealer immedi-
ately.

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands