Toyota Corolla Hybrid 2019 Owner'S Manual Download Page 269

Page: 269 / 491

267

COROLLA HV_ 国瑞 _GE

4-5. Using the driving support systems

riv

ing

Each time the switch is pressed, the

system changes between power mode,

normal mode and Eco drive mode.

Normal mode

Provides an optimal balance of fuel

economy, quietness, and dynamic per-

formance. Suitable for normal driving.

Power mode

Controls the hybrid system to provide

quick, powerful acceleration. Making it

suitable for when agile driving response

is desired, such as when driving on

roads with many curves.
When the power mode is selected,

power mode indicator comes on.

Eco drive mode

Helps the driver accelerate in an

eco-friendly manner and improve fuel

economy through moderate throttle

characteristics and by controlling the

operation of the air conditioning system

(heating/cooling).

When the Eco drive mode is selected,

Eco drive mode indicator comes on.

■

Operation of the air conditioning
system in Eco drive mode

Eco drive mode controls the heat-

ing/cooling operations and fan speed of

the air conditioning system to enhance

fuel efficiency. To improve air condition-

ing performance, perform the following

operations:

●

Turn off eco air conditioning mode (if

equipped) (



P.324)

●

Adjust the fan speed (



P.325)

●

Turn off Eco drive mode

■

Automatic deactivation of Power
mode

If the power switch is turned off after

driving in Power mode, the drive mode

will be changed to normal mode.

Driving mode select

switch

The driving modes can be
selected to suit driving condi-
tion.

Selecting a drive mode

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands