Toyota Corolla Hybrid 2019 Owner'S Manual Download

Page: 223 / 491

221

COROLLA HV_ 国瑞 _GE

4-5. Using the driving support systems

riv

ing

ously displayed on the multi-information

display.
Depending on the vehicle and road con-

ditions, the warning may not operate.

■

Warning message

If the following warning message is dis-

played on the multi-information display

and the LTA indicator illuminates in

orange, follow the appropriate trouble-

shooting procedure. Also, if a different

warning message is displayed, follow

the instructions displayed on the screen.

●

“LTA Malfunction Visit Your Dealer”

The system may not be operating prop-

erly. Have the vehicle inspected by your

Toyota dealer.

●

“LTA Unavailable”

The system is temporarily canceled due

to a malfunction in a sensor other than

the front camera. Turn the LTA system

off, wait for a little while, and then turn

the LTA system back on.

●

“LTA Unavailable at Current Speed”

The function cannot be used as the

vehicle speed exceeds the LTA opera-

tion range. Drive slower.

■

Customization

Function settings can be changed.

(



P.462)

: If equipped

LDA (Lane Departure

Alert with steering con-

trol)

When driving on highways and
freeways with white (yellow)
lane lines, this function alerts
the driver when the vehicle
might depart from its lane or

course

and provides assis-

tance by operating the steering
wheel to keep the vehicle in its

lane or course

The LDA system recognizes
white (yellow) lane lines or a

course

using the front cam-

era. Additionally, it detects
preceding vehicles using the
front camera and radar.

: Boundary between asphalt and the

side of the road, such as grass,

soil, or a curb

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands