Toyota Corolla Hatchback 2023 Manual Download Page 74

Page: 74 / 436

2-1. Instrument cluster

different distances independently.
To reset, display the desired trip
meter and press and hold the dis-
play change button.

The brightness of the instrument
panel lights can be adjusted.

Brighter

Darker

■

Instrument panel light bright-

ness adjustment

When the headlights or parking

lights are turned on, the meter and

instrument panel lights will be

dimmed. However, if the instrument

panel brightness dial is set to the

highest position, the lights will not

dim even if the headlights or parking

lights are turned on.

■

The clocks can be adjusted
on the audio system
screen.

Refer to “MULTIMEDIA
OWNER’S MANUAL”.

Changing the instrument
panel light brightness

Adjusting the clock

Summary of Contents for Corolla Hatchback 2023





















































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hatchback 2023

Reviews:

Related manuals for Corolla Hatchback 2023

Brands by name

Popular brands

Toyota Corolla Hatchback 2023, Manual

Search results

Summary of Contents for Corolla Hatchback 2023

Reviews:

Related manuals for Corolla Hatchback 2023

Brands by name

Popular brands