Toyota Corolla 2002 Owner'S Manual Download Page 161

Page: 161 / 260

’02 Corolla U (L/O 0105)

2002 Corolla_U (OM12743U)

(f)

Stop and check.

(g)

Take vehicle to
Toyota dealer.

(h)

Close all doors.

(i)

Take vehicle to
Toyota dealer
immediately.

(j)

Add washer

fluid.

If the indicator or
buzzer comes on...

Do this.

(k)

Remove key.

Key reminder
buzzer

(l)

Turn off lights.

Light reminder
buzzer

If the indicator or
buzzer comes on...

Do this.

(a) Brake System Warning Light

This light comes on in the following cases
when the ignition key is in the “ON” posi-
tion.

When the parking brake is applied...

When the brake fluid level is low...

CAUTION

It is dangerous to continue driving
normally when the brake fluid level is
low.

Have your vehicle checked at your
Toyota dealer in the following case:

The light does not come on even if the
parking brake is applied when the igni-
tion key is in the “ON” position.

Summary of Contents for Corolla 2002





































































































































































































































































Search results

Summary of Contents for Corolla 2002

Reviews:

Related manuals for Corolla 2002

Brands by name

Popular brands

Toyota Corolla 2002, Owner'S Manual

Search results

Summary of Contents for Corolla 2002

Reviews:

Related manuals for Corolla 2002

Brands by name

Popular brands