Toyota Corolla 1998 Page 110 Owner'S Manual Download

Page: 110 / 204

1998 COROLLA(U)

118

—Air flow selector settings

—Operating tips

To cool off your Toyota after it has

been parked in the hot sun, drive with

the windows open for a few minutes.
This vents the hot air, allowing the air

conditioning to cool the interior more

quickly.

Make sure the air intake grilles in front

of the windshield are not blocked (by

leaves or snow, for example).

On humid days, do not blow cold air

on the windshield. The windshield could
fog up because of the difference in air

temperature on the inside and outside

of the windshield.

Keep the area under the front seats

clear to allow air to circulate through-

out the vehicle.

On cold days, move the fan speed to

”HI” for a minute to help clear the in-
take ducts of snow or moisture. This

can reduce the amount of fogging on

the windows.

Summary of Contents for Corolla 1998













































































































































































































Search results

Summary of Contents for Corolla 1998

Reviews:

Related manuals for Corolla 1998

Brands by name

Popular brands

Toyota Corolla 1998, Owner'S Manual

Search results

Summary of Contents for Corolla 1998

Reviews:

Related manuals for Corolla 1998

Brands by name

Popular brands