Toyota Celica 2003 Page 34 Operating Manual Download | Manualshive

Page: 34 / 280

background image

’03MY CELICA U (L/O 0208)

34

2003 CELICA from Aug. ’02 Prod. (OM20809U)

When the front seat belt pretensioners are
activated, an operating noise may be
heard and a small amount of smoke–like
gas may be released. This gas is harm-
less and does not indicate that a fire is
occurring.

Once the front seat belt pretensioners
have been activated, the seat belt retrac-
tors remain locked.

CAUTION

Do not modify, remove, strike or open
the front seat belt pretensioner as-
semblies, airbag sensor or surround-
ing area or wiring. Doing so may
cause sudden operation of the front
seat belt pretensioners or disable the
system, which could result in death
or serious injury.

Failure to follow these instructions
can result in death or serious inju-
ries. Consult your Toyota dealer
about any repairs and modifications.

NOTICE

Do not perform any of the following
changes without consulting your
Toyota dealer. Such changes can
interfere with proper operation of the
front seat belt pretensioners in some
cases.

Installation of electronic devices
such as a mobile two–way radio,
cassette tape player or compact
disc player

Repairs on or near the front seat
belt retractor assemblies

Modification of the suspension sys-
tem

Modification of the front end struc-
ture

Attachment of a grille guard (bull
bar, kangaroo bar, etc.), snowplow,
winches or any other equipment to
the front end

Repairs made on or near the front
fenders, front end structure or con-
sole

This front seat belt pretensioner system
has a service reminder indicator to inform
the driver of operating problems. If any of
the following conditions occurs, this indi-
cates a malfunction of the airbags or pre-
tensioners. Contact your Toyota dealer as
soon as possible to service the vehicle.

The light does not come on when the
ignition key is turned to the “ON” posi-
tion, or the light remains on.

The light comes on or flashes while
driving.

If either front seat belt does not retract
or cannot be pulled out due to a mal-
function or activation of the relevant
front seat belt pretensioner.

«
...
32
33
34
35
36
...
»

Summary of Contents for Celica 2003

























































































































































































































































































Reviews:

No comments

Related manuals for Celica 2003

Brand: AA Products Pages: 8

Brand: Raven Pages: 24

Brand: Weather Guard Pages: 4

Brand: Jeep Pages: 608

Indigo MANZA QUADRAJET 90

Brand: TATA Motors Pages: 10

Brand: Cadillac Pages: 518

Brand: Opel Pages: 141

Brand: Nav TV Pages: 3

Brand: Alfa Romeo Pages: 8

Brand: Whispbar Pages: 14

Brand: GMC Pages: 120

Brand: Prime Tech Pages: 6

Brand: METRON Pages: 4

1966 Spider 105

Brand: Alfa Romeo Pages: 46

Brand: Metra Electronics Pages: 20

3 Facelift 2006

Brand: Mazda Pages: 94

Brand: Cadillac Pages: 335

Brand: Yakima Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands