Toyota Celica 2000 Operating Manual Download Page 17 | Manualshive

Page: 17 / 255

Toyota Celica 2000 Operating Manual Download Page 17

Celica_U

17

2000 CELICA (OM20735U)

Hood

To open the hood:

1. Pull the hood lock release lever. The

hood will spring up slightly.

CAUTION

Before driving, be sure that the hood
is closed and securely locked. Other-
wise, the hood may open unexpected-
ly while driving and an accident may
occur.

2. In front of the vehicle, pull up the

auxiliary catch lever and lift the
hood.

3. Hold the hood open by inserting the

support rod into the slot.

Before closing the hood, check to see that
you have not forgotten any tools, rags,
etc. and return the support rod to its
clip—this prevents rattles. Then lower the
hood and make sure it locks into place.
If necessary, press down gently on the
front edge to lock it.

CAUTION

After inserting the support rod into
the slot, make sure the rod supports
the hood securely from falling down
on to your head or body.

«
...
15
16
17
18
19
...
»

Summary of Contents for Celica 2000
































































































































































































































































Reviews:

No comments