Toyota Celica 2000 Page 129 Operating Manual Download

Page: 129 / 255

Celica_U

129

2000 CELICA (OM20735U)

Defogging and defrosting

The inside of the windshield

For best results, set controls to:

Fan speed—Any setting except “OFF”
Temperature—Towards WARM

(red zone) to heat;
COLD (blue zone)
cool

Air intake—FRESH (outside air)
Air flow—WINDSHIELD

Turning the Air Flow Selector to wind-
shield position turns on the defroster to
clear the front view more quickly.

Vehicles with “A/C” button—

Press the “A/C” button for dehumidified
heating or cooling. This setting clears the
front view more quickly.

On humid days, do not blow cold air
on the windshield—the difference be-
tween the outside and inside tempera-
tures could make the fogging worse.

The outside of the windshield

For best results, set controls to:

Fan speed—Any setting except “OFF”
Temperature—Towards WARM

(red zone)

Air intake—FRESH (outside air)
Air flow—WINDSHIELD

Turning the Air Flow Selector to wind-
shield position turns on the defroster to
clear the front view more quickly.

Vehicles with “A/C” button—

Press the “A/C” button for dehumidified
heating or cooling. This setting clears the
front view more quickly.

To heat the vehicle interior while de-
frosting the windshield, choose floor/
windshield air flow.

Instrument panel vents

Open

If air flow control is not satisfactory, check
the instrument panel vents. The instrument
panel vents may be opened or closed as
shown.

Summary of Contents for Celica 2000
































































































































































































































































Search results

Summary of Contents for Celica 2000

Reviews:

Related manuals for Celica 2000

Brands by name

Popular brands

Toyota Celica 2000, Operating Manual

Search results

Summary of Contents for Celica 2000

Reviews:

Related manuals for Celica 2000

Brands by name

Popular brands