Toyota Celica 2000 Page 125 Operating Manual Download

Page: 125 / 255

Celica_U

125

2000 CELICA (OM20735U)

Fan speed selector

Turn the knob to adjust the fan speed—to
the right to increase, to the left to de-
crease.

Temperature selector

Turn the knob to adjust the tempera-
ture—to the right to warm, to the left to
cool.

Air flow selector

Turn the knob to select the vents used for
air flow.

1. Panel—Air flows mainly from the in-

strument panel vents.

2. Bi- level—Air flows from both the floor

vents and the instrument panel vents.

3. Floor—Air flows mainly from the floor

vents.

4. Floor/Windshield—Air flows mainly

from the floor vents and windshield
vents.

Use with the air intake selector posi-
tioned in Fresh.

5. Windshield—Air flows mainly from the

windshield vents.

Use with the air intake selector posi-
tioned in Fresh.

For details about air flow selector settings,
see the illustration after “A/C” button.

Turning the Air Flow Selector to wind-
shield position turns on the defroster to
clear the front view more quickly.

Summary of Contents for Celica 2000
































































































































































































































































Search results

Summary of Contents for Celica 2000

Reviews:

Related manuals for Celica 2000

Brands by name

Popular brands

Toyota Celica 2000, Operating Manual

Search results

Summary of Contents for Celica 2000

Reviews:

Related manuals for Celica 2000

Brands by name

Popular brands