manualshive.com logo in svg

Toyota CAMRY HYBRID 2021, Owner'S Manual

Share
Download
Toyota CAMRY HYBRID 2021 Owner'S Manual Download Page 473

471

6-3. Do-it-yourself maintenance

CAMRY_HV_GE

6

Main

ten
ance

 an
d 

care

Select “Set Pressure” then
press and hold 

 until

the tire pressure warning
light blinks 3 times.

Then a message will be dis-
played on the multi-information
display.
“- -” will be displayed on the
multi-information display for the
inflation pressure of each tire
while initialization is being per-
formed.

Drive at approximately 40 km/h (25 mph) or more for approxi-
mately 10 to 30 minutes.

When initialization is complete, the inflation pressure of each tire will be
displayed on the multi-information display.
Even if the vehicle is not driven at approximately 40 km/h (25 mph) or
more, initialization can be completed by driving for a long time. How-
ever, if initialization does not complete after driving for 1 hour or more,
park the vehicle in a safe place for approximately 20 minutes and then
drive the vehicle again.

◆

Registering ID codes

Vehicles without a tire inflation pressure display function

Every tire pressure warning valve and transmitter has a unique ID
code. In addition to the set of tire pressure warning system sensor
ID codes initially registered to the vehicle, a second set of ID codes
can be registered.
A second set of tire pressure warning system sensor ID codes can
be registered at your Toyota dealer. When 2 sets of ID codes have
been registered, either ID code set can be selected.

Vehicles with a tire inflation pressure display function

Every tire pressure warning valve and transmitter has a unique ID
code. When replacing a tire pressure warning valve and transmitter,
it is necessary to register the ID codes. 
The ID codes can be registered on 

 of the multi-information dis-

play.

7

8

CAMRY HYBRID_OM_General_OM33F09E

Summary of Contents for CAMRY HYBRID 2021













































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands