manualshive.com logo in svg

Toyota Camry Hybrid 2018, Owner'S Manual, Page: 551 / 596

Share
Download
Toyota Camry Hybrid 2018 Owner'S Manual Download Page 551

551

8

Ve
hicle

 spe

c

ifi

c

ations

8-2. Customization

When customizing vehicle features, ensure that the vehicle is parked
in a safe place with the shift lever in P and the parking brake set.

■

Changing on the audio system screen

Press the “MENU” button.

Select “Setup” on the “Menu” screen.

Select “General” or “Vehicle” on the “Setup” screen.

Various setting can be changed. Refer to the list of settings that can
be changed for details.

■

Changing using the multi-information display

→

P. 105, 119

Customizable features

Your vehicle includes a variety of electronic features that can be
personalized to suit your preferences. The settings of these fea-
tures can be changed using the multi-information display, on the
audio system screen, or at your Toyota dealer.

Customizing vehicle features

1
2
3

Summary of Contents for Camry Hybrid 2018





















































































































































































































































































































































































































































































































































































































Reviews:

No comments