manualshive.com logo in svg

Toyota Camry Hybrid 2018, Owner'S Manual

Share
Download
Toyota Camry Hybrid 2018 Owner'S Manual Download Page 28

28

1-1. For safe use

●

Extend the shoulder belt so that
it comes fully over the shoulder,
but does not come into contact
with the neck or slide off the
shoulder.

●

Position the lap belt as low as
possible over the hips.

●

Adjust the position of the seat-
back. Sit up straight and well
back in the seat.

●

Do not twist the seat belt.

To fasten the seat belt, push the
plate into the buckle until a click
sound is heard. 

To release the seat belt, press
the release button.

Seat belts

Make sure that all occupants are wearing their seat belts before
driving the vehicle. 

Correct use of the seat belts

Fastening and releasing the seat belt

Release 
button

1

2

Summary of Contents for Camry Hybrid 2018





















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands