Toyota Camry Hybrid 2018 Owner'S Manual Download Page 142

Page: 142 / 596

142

2. Instrument cluster

■

History



Entune Audio or Entune Audio Plus (vehicles without Data Com-
munication Module)

Press the “INFO” button. (

→

P. 136)

If the “Energy Monitor” or “Trip Information” screen is displayed, select
“History”.



Entune Audio Plus (vehicles with Data Communication Module)

Press the “INFO” button.

Select “ECO” on the “Information” screen.

If the “Energy Monitor” or “Trip Information” screen is displayed, select
“History”.



Entune Premium Audio

Press the “MENU” button. (

→

P. 136)

Select “Info” on the “Menu” screen.

Select “ECO” on the “Information” screen.

If “Energy Monitor” or “Trip Information” screen is displayed, select “His-
tory”.

Resetting the past record
data

Best past fuel consumption

Current fuel economy

Previous fuel consumption
record



Entune Audio or Entune Audio Plus

Displays the daily average fuel consumption. (Instead of the date,
“Trip 1” through “Trip 5” will be displayed.)



Entune Premium Audio

Displays the daily average fuel consumption.

Updating the average fuel consumption data

Displays a maximum of five past record of the average fuel consump-
tion.

The image is example only, and may vary slightly from actual condi-
tions.

1
2

1
2
3

2
3
4

Summary of Contents for Camry Hybrid 2018





















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Camry Hybrid 2018

Reviews:

Related manuals for Camry Hybrid 2018

Brands by name

Popular brands

Toyota Camry Hybrid 2018, Owner'S Manual

Search results

Summary of Contents for Camry Hybrid 2018

Reviews:

Related manuals for Camry Hybrid 2018

Brands by name

Popular brands