Toyota C-HR2018, Owner'S Manual, Page: 410 / 516

410
7-2. Steps to take in an emergency
C-HR_OM_USA_OM10526U
(Yellow)
Brake system warning light
Indicates a malfunction in the electric parking brake
→
Have the vehicle inspected by your Toyota dealer
immediately.
PCS warning light
When the warning light flashes (and a buzzer sounds):
Indicates a malfunction in the PCS (Pre-Collision System)
→
Have the vehicle inspected by your Toyota dealer
immediately.
When the warning light illuminates:
Indicates that the PCS (Pre-Collision System) is temporar-
ily unavailable, possibly due to either of the following:
• An area around the radar sensor or camera sensor
being dirty or covered with condensation, ice, stickers,
etc.
→
Clear the dirt, condensation, ice, stickers, etc.
(
→
P. 206, 207)
• Radar sensor or camera sensor operational conditions
(such as temperature, etc.) being not met
→
Driving is possible in this case. The PCS (Pre-Colli-
sion System) will be enabled if the operational condi-
tions (such as temperature, etc.) are met again.
When the warning light is illuminated:
• Either the VSC (Vehicle Stability Control) system or PCS
(Pre-Collision System) is disabled or both are disabled.
→
To enable the PCS, enable both the VSC system and
PCS. (
→
P. 215, 281)
*
2
(Flashes) (U.S.A.)
(Flashes) (Canada)
Parking brake indicator (warning buzzer)
It is possible that the parking brake is not fully engaged or
released
→
Operate the parking brake switch once again.
This light comes on when the parking brake is not
released. If the light turns off after the parking brake is fully
released, the system is operating normally.
Warning light Warning light/Details/Actions