manualshive.com logo in svg

Toyota C-HR2018, Owner'S Manual, Page: 397 / 516

Share
Download
Toyota C-HR2018 Owner'S Manual Download Page 397

397

7-1. Essential information

C-HR_OM_USA_OM10526U

7

Wh
en tro

uble

 a

ris

es

If your vehicle has to be stopped in an 

emergency

Steadily step on the brake pedal with both feet and firmly depress it.

Do not pump the brake pedal repeatedly as this will increase the effort
required to slow the vehicle.

Shift the shift lever to N.

If the shift lever is shifted to N
After slowing down, stop the vehicle in a safe place by the road.
Stop the engine.

If the shift lever cannot be shifted to N
Keep depressing the brake pedal with both feet to reduce vehicle
speed as much as possible.

Only in an emergency, such as if it becomes impossible to stop
the vehicle in the normal way, stop the vehicle using the follow-
ing procedure:

1

2

3
4

3

Summary of Contents for C-HR2018





































































































































































































































































































































































































































































































































Reviews:

No comments