Toyota C-HR2018, Owner'S Manual

Page: 355 / 516

355
6-3. Do-it-yourself maintenance
6
Mainten
ance an
d ca
re
C-HR_OM_USA_OM10526U
■
How to initialize the tire pressure warning system
Park the vehicle in a safe place and turn the engine switch to the
“LOCK” position (vehicles without a smart key system) or off
(vehicles with a smart key system).
Initialization cannot be performed while the vehicle is moving.
Adjust the tire inflation pressure to the specified cold tire inflation
pressure level. (
→
P. 456)
Make sure to adjust the tire pressure to the specified cold tire infla-
tion pressure level. The tire pressure warning system will operate
based on this pressure level.
Turn the engine switch to the “ON” position (vehicles without a
smart key system) or IGNITION ON mode (vehicles with a smart
key system).
Press “
<
” or “
>
” of the meter control switch to select .
( → P. 90)
Press “
∧
” or “
∨
” of the meter control switch to select the “Vehicle
Settings” and then press to display the menu.
Press “ ∧ ” or “ ∨ ” of the meter
control switch to select
and then press
and hold .
When initialization completes, a message is displayed on the
multi-information display and the tire pressure warning light will
blink 3 times.
1
2
3
4
5
6
7