Toyota C-HR2018 Page 24 Owner'S Manual Download

Page: 24 / 516

C-HR_OM_USA_OM10526U

For safety drive

Adjust the angle of the seat-
back so that you are sitting
straight up and so that you do
not have to lean forward to
steer. (

→

P. 127)

Adjust the seat so that you can
depress the pedals fully and so
that your arms bend slightly at
the elbow when gripping the
steering wheel. (

→

P. 127, 13 3)

Lock the head restraint in place with the center of the head restraint
closest to the top of your ears. (

→

P. 130)

Wear the seat belt correctly. (

→

P. 26)

Make sure that all occupants are wearing their seat belts before driv-
ing the vehicle. (

→

P. 26)

Use a child restraint system appropriate for the child until the child
becomes large enough to properly wear the vehicle’s seat belt.
(

→

P. 55)

For safe driving, adjust the seat and mirror to an appropriate
position before driving.

Correct driving posture

Correct use of the seat belts

Summary of Contents for C-HR2018





































































































































































































































































































































































































































































































































Search results

Summary of Contents for C-HR2018

Reviews:

Related manuals for C-HR2018

Brands by name

Popular brands

Toyota C-HR2018, Owner'S Manual

Search results

Summary of Contents for C-HR2018

Reviews:

Related manuals for C-HR2018

Brands by name

Popular brands