Home
/
Toyota
/
C-HR2018
/
Owner'S Manual

Toyota C-HR2018, Owner'S Manual, Page: 204 / 516

Share

Page: 204 / 516

Toyota C-HR2018 Owner'S Manual Download Page 204

204

4-5. Using the driving support systems

C-HR_OM_USA_OM10526U

Toyota Safety Sense P

◆

PCS (Pre-Collision System)

→

◆

LDA (Lane Departure Alert with steering control)

→

◆

Automatic High Beam

→

◆

Dynamic radar cruise control with full-speed range

→

The Toyota Safety Sense P consists of the following drive assist
systems and contributes to a safe and comfortable driving expe-
rience:

WARNING

■

Toyota Safety Sense P

The Toyota Safety Sense P is designed to operate under the assumption
that the driver will drive safely, and is designed to help reduce the impact to
the occupants and the vehicle in the case of a collision or assist the driver in
normal driving conditions.
As there is a limit to the degree of recognition accuracy and control perfor-
mance that this system can provide, do not overly rely on this system. The
driver is always responsible for paying attention to the vehicle’s surround-
ings and driving safely.

«
...
202
203
204
205
206
...
»

Summary of Contents for C-HR2018





































































































































































































































































































































































































































































































































Reviews:

No comments