manualshive.com logo in svg

Toyota C-HR2018, Owner'S Manual, Page: 146 / 516

Share
Download
Toyota C-HR2018 Owner'S Manual Download Page 146

146

4-1. Before driving

C-HR_OM_USA_OM10526U

Driving the vehicle

→

P. 162, 165

With the brake pedal depressed, shift the shift lever to D. (

→

P. 171)

Release the parking brake. (

→

P. 178)

If the parking brake is in automatic mode, the parking brake is released
automatically when shifting the shift lever to any position other than P. 
(

→

P. 177)

Gradually release the brake pedal and gently depress the accelera-
tor pedal to accelerate the vehicle.

With the shift lever in D, depress the brake pedal.
If necessary, set the parking brake.

If the vehicle is to be stopped for an extended period of time, shift the shift
lever to P or N. (

→

P. 171)

The following procedures should be observed to ensure safe
driving: 

Starting the engine

Driving

Stopping

1
2

3

1
2

Summary of Contents for C-HR2018





































































































































































































































































































































































































































































































































Reviews:

No comments