Toyota C-HR2018, Owner'S Manual, Page: 110 / 516

110
3-2. Opening, closing and locking the doors
C-HR_OM_USA_OM10526U
■
Switching the door unlock function (vehicles with a smart key system)
It is possible to set which doors the entry function unlocks using the wireless
remote control.
Turn the engine switch off.
When the indicator light on the key surface is not on, press and hold for
approximately 5 seconds while pressing and holding .
The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at least
5 seconds, and repeat step
.)
■
Open door warning buzzer
If a door or the back door is not fully closed, a buzzer will sound when the
vehicle speed reaches 3 mph (5 km/h).
The open door(s) or back door is indicated on the multi-information display.
■
Conditions affecting the operation of the smart key system or wireless
remote control

Vehicles without a smart key system
→ P. 101

Vehicles with a smart key system
→ P. 121
■
Customization
Settings (e.g. unlocking function using a key) can be changed.
(Customizable features:
→ P. 474)
1
2
2
2
Multi-information
display
Unlocking function Beep
Holding the driver’s door
handle unlocks only the
driver’s door.
Exterior: Beeps 3 times
Interior: Pings once
Holding the front passen-
ger’s door handle unlocks
all the doors.
Holding a door handle
unlocks all the doors. Exterior: Beeps twice
Interior: Pings once