Toyota C-HR2018 Owner'S Manual Download Page 108

Page: 108 / 516

108

3-2. Opening, closing and locking the doors

C-HR_OM_USA_OM10526U

■

If the smart key system or wireless remote control does not operate
properly

Vehicles with a smart key system: Use the mechanical key to lock and unlock
the doors. (

→

P. 436)

Replace the battery with a new one if it is depleted. (

→

P. 373)

◆

Door lock switches

Locks all the doors
Unlocks all the doors

◆

Inside lock buttons

Locks the door
Unlocks the door

The front doors can be opened
by pulling the inside handle
even if the lock buttons are in
the lock position.

Unlocking and locking the doors from the inside

Summary of Contents for C-HR2018





































































































































































































































































































































































































































































































































Search results

Summary of Contents for C-HR2018

Reviews:

Toyota C-HR2018, Owner'S Manual, Page: 108 / 516

Search results

Summary of Contents for C-HR2018

Reviews: