manualshive.com logo in svg

Toyota C-HR2018, Owner'S Manual, Page: 287 / 516

Share
Download
Toyota C-HR2018 Owner'S Manual Download Page 287

287

4-6. Driving tips

4

Drivin

g

C-HR_OM_USA_OM10526U

Regulations regarding the use of tire chains vary depending on loca-
tion and type of road. Always check local regulations before installing
chains.

■

Tire chain installation

Observe the following precautions when installing and removing chains:

●

Install and remove tire chains in a safe location.

●

Install tire chains on the front tires. Do not install tire chains on the rear tires.

●

Install tire chains on front tires as tightly as possible. Retighten chains after
driving 1/4 

⎯

 1/2 mile (0.5 

⎯

 1.0 km).

●

Install tire chains following the instructions provided with the tire chains.

Regulations on the use of tire chains

Summary of Contents for C-HR2018





































































































































































































































































































































































































































































































































Reviews:

No comments